Gen 2 Ultra Low-Profile Scout Mount for Mauser Yugo M48, K.Kale, Spanish M43, VZ.24 and Argentine M1909 Gen 2 Ultra Low-Profile Scout Mount for Mauser Yugo M48, K.Kale, Spanish M43, VZ.24 and Argentine M1909 BadAce Tactical NOTE: Works on the following Mauser models: Yugo M48, M24/47 Turkish Model 1938, including K.Kale, ASFA/ANK ARA Czech VZ.24 German G24(t) Spanish M43, Spanish Air Force M43 Argentine Model 1909 rifle (not Carbine) Persien Mauser M98/29 Belgium FN Mauser 30-06 (FN 24/30 M1950) Serbian/Yugoslavian Model 1924 Columbian R. Famage 30-06 Mauser Brazilian Mauser M954 Mauser It will NOT work on any other models. Please use our Scope Mount Selector to make sure this works for your rifle.   No drill, no tap, no permanent modification to your historical Mauser rifles ULTRA low profile design allows comfortable cheek weld Works with Long Eye Relief (LER) scopes and you can still use stripper clips for speed loading Elevation adjustable and works for many large-ring Mauser rifles No gunsmith required, installed in 20 minutes! Precision CNC milled from a whole block of aircraft grade aluminum alloy [Firearms, optics and rings are for display only and NOT included] Package contents: One aircraft grade aluminum alloy scout mount with steel receiver nut and bolt Wrenches and threadlocker   NOTE:  How to remove the rear sight retaining pin Not all models' rear sight leaves have a retaining pin. You should be able to see the retaining pin sticking out a little bit from the head of the rear sight leaf if there is one, such as this one:  The retaining pin is slightly longer than the rear sight leaf - this is to prevent it from being pressed down and removed. So, if your rear sight leaf has a retaining pin present, you must punch it out first.  Some models don't have retaining pins, such as this one below:  If that is the case, you can simply press down the rear sight leaf and remove it.  The easy way to remove the rear sight leaf:    The following are links to the equipment we used in this video including the scope mount and other third-party accessories such as rings, scopes, etc. We purchased these accessories by ourselves, and we only recommend products that we trust and have been tested extensively by us. LONG EYE RELIEF SCOPES: Hi-Lux Optics Long Eye Relief 2-7x32mm Riflescope (used in this video)We also recommend the Burris scout riflescope 2-7x32mm, which comes with the Burris forever warranty SCOPE RINGS: Both two LER scopes above have a 32mm objective lens and can be mounted very close to the bore, which is always desired by shooters. The following two low-profile scope rings are the perfect match for this setup at competitive prices: Weaver Quad Lock 1-Inch medium 49046 (used in this video) Leupold Rifleman Detachable low Rings 56524 Manual   Download the PDF manual

Gen 2 Ultra Low-Profile Scout Mount for Mauser Yugo M48, K.Kale, Spanish M43, VZ.24 and Argentine M1909

$79.95 USD
In Stock
Add to Wishlist

NOTE: Works on the following Mauser models:

  • Yugo M48, M24/47
  • Turkish Model 1938, including K.Kale, ASFA/ANK ARA
  • Czech VZ.24
  • German G24(t)
  • Spanish M43, Spanish Air Force M43
  • Argentine Model 1909 rifle (not Carbine)
  • Persien Mauser M98/29
  • Belgium FN Mauser 30-06 (FN 24/30 M1950)
  • Serbian/Yugoslavian Model 1924
  • Columbian R. Famage 30-06 Mauser
  • Brazilian Mauser M954 Mauser

It will NOT work on any other models.

Please use our Scope Mount Selector to make sure this works for your rifle.  

  • No drill, no tap, no permanent modification to your historical Mauser rifles
  • ULTRA low profile design allows comfortable cheek weld
  • Works with Long Eye Relief (LER) scopes and you can still use stripper clips for speed loading
  • Elevation adjustable and works for many large-ring Mauser rifles
  • No gunsmith required, installed in 20 minutes!
  • Precision CNC milled from a whole block of aircraft grade aluminum alloy

[Firearms, optics and rings are for display only and NOT included]

Package contents:

  • One aircraft grade aluminum alloy scout mount with steel receiver nut and bolt
  • Wrenches and threadlocker

 

NOTE:  How to remove the rear sight retaining pin

Not all models' rear sight leaves have a retaining pin. You should be able to see the retaining pin sticking out a little bit from the head of the rear sight leaf if there is one, such as this one: 

The retaining pin is slightly longer than the rear sight leaf - this is to prevent it from being pressed down and removed. So, if your rear sight leaf has a retaining pin present, you must punch it out first. 

Some models don't have retaining pins, such as this one below: 

If that is the case, you can simply press down the rear sight leaf and remove it. 

The easy way to remove the rear sight leaf: 

 

    The following are links to the equipment we used in this video including the scope mount and other third-party accessories such as rings, scopes, etc.

    We purchased these accessories by ourselves, and we only recommend products that we trust and have been tested extensively by us.

    NOTE: Works on the following Mauser models:

    • Yugo M48, M24/47
    • Turkish Model 1938, including K.Kale, ASFA/ANK ARA
    • Czech VZ.24
    • German G24(t)
    • Spanish M43, Spanish Air Force M43
    • Argentine Model 1909 rifle (not Carbine)
    • Persien Mauser M98/29
    • Belgium FN Mauser 30-06 (FN 24/30 M1950)
    • Serbian/Yugoslavian Model 1924
    • Columbian R. Famage 30-06 Mauser
    • Brazilian Mauser M954 Mauser

    It will NOT work on any other models.

    Please use our Scope Mount Selector to make sure this works for your rifle.  

    • No drill, no tap, no permanent modification to your historical Mauser rifles
    • ULTRA low profile design allows comfortable cheek weld
    • Works with Long Eye Relief (LER) scopes and you can still use stripper clips for speed loading
    • Elevation adjustable and works for many large-ring Mauser rifles
    • No gunsmith required, installed in 20 minutes!
    • Precision CNC milled from a whole block of aircraft grade aluminum alloy

    [Firearms, optics and rings are for display only and NOT included]

    Package contents:

    • One aircraft grade aluminum alloy scout mount with steel receiver nut and bolt
    • Wrenches and threadlocker

     

    NOTE:  How to remove the rear sight retaining pin

    Not all models' rear sight leaves have a retaining pin. You should be able to see the retaining pin sticking out a little bit from the head of the rear sight leaf if there is one, such as this one: 

    The retaining pin is slightly longer than the rear sight leaf - this is to prevent it from being pressed down and removed. So, if your rear sight leaf has a retaining pin present, you must punch it out first. 

    Some models don't have retaining pins, such as this one below: 

    If that is the case, you can simply press down the rear sight leaf and remove it. 

    The easy way to remove the rear sight leaf: 

     

      The following are links to the equipment we used in this video including the scope mount and other third-party accessories such as rings, scopes, etc.

      We purchased these accessories by ourselves, and we only recommend products that we trust and have been tested extensively by us.

      PLEASE READ THE FOLLOWING TERMS AND CONDITIONS OF USE CAREFULLY BEFORE USING THIS WEBSITE. All users of this site agree that access to and use of this site are subject to the following terms and conditions and other applicable law. If you do not agree to these terms and conditions, please do not use this site.

      Order Processing:

      Normal order processing can take between 1-3 business days (Monday – Friday)

      Return Policy:

      We guarantee the quality of our products and we want you to be completely satisfied with your purchases. If for any reason you are not completely satisfied with your purchase, you can return the purchased items within 30 days of receipts for an exchange or full refund/Credit (less shipping charges). If you would like to make a return or exchange, you must contact us by email to get an RMA (Return Merchandise Authorization) number before returning your items.

      Please note that shipping cost is non-refundable, and we are not responsible for the return shipping.

      Orders returned after 30 days will be subject to a 25% re-stocking fee. Orders returned after 90 days will be subject to a 50% re-stocking fee.

      Limited Lifetime Warranty

      We (Ace Recreational Equipment and Services Limited) warrants our NDT Scope Mount to be free of defects in materials and workmanship for as long as it is owned by the original owner. We will repair or replace (at our option) any such defective product when it is returned by the original owner with a copy of the original receipt. The repair or replacement will be without charge except for reasonable shipping, handling and insurance charges.

      International (outside of Canada and USA) Ordering

      • International orders are shipped via CanadaPost. There is no delivery guarantee on international orders.  We have no control over customs, international taxes, or other charges imposed by countries outside of the US and Canada.
      • We (Ace Recreational Equipment and Services Limited) are NOT responsible for international shipping delays, such as customs delays and are not responsible for any customs. The buyer assumes all responsibilities of claims made with the shipping carrier and all duties/fees incurred on the shipment. Please contact info@badacetactical.com if you have any questions.
      • Leaving a valid phone number is highly recommended in case the customs office of your country needs to contact you for importing fees or taxes. 
      • All international packages must include a customs form with values of the products. Please do NOT ask us to remove the value or claim it as a gift. Without the customs form, the postal office / customs office will reject the package.