No Drill Low-Profile Scout Mount for Mosin Nagant M9130,M44,M38,T53 No Drill Low-Profile Scout Mount for Mosin Nagant M9130,M44,M38,T53 BadAce Tactical [Firearms, optics and rings are for display only and NOT included] Fits Mosin Nagant M9130 rifle (both round and hex receiver), Mosin Nagant Carbine M44, M38 and T53 Works with long eye relief scope so you can keep the straight bolt and use stripper clips No drill, no tap, no permanent modification to your Mosin Nagant ULTRA low profile design allows comfortable cheek weld Elevation adjustable and compatible with stripper clips for fast loadingTo lower the front of the mount (the bullet's point of impact will go UP), loosen the main screw first and tighten the elevation set screw; and vice versa. Works with Long Eye Relief (LER) scopes and you can still use stripper clips for speed loading No gunsmith required, installed in 20 minutes! The following are links to the equipment we used in this video including the scope mount and other third-party accessories such as rings, scopes, etc. We purchased these accessories by ourselves, and we only recommend products that we trust and have been tested extensively by us. Long Eye Relief scopes:  Hi-Lux Optics Long Eye Relief 2-7x32mm Riflescope (used in this video) We also recommend the Burris scout riflescope 2-7x32mm, which comes with the Burris forever warranty. Scope rings: Both two LER scopes above have 32mm objective lens and can be mounted very close to the bore, which is always desired by shooters. The following two low-profile scope rings are the perfect match for this setup at competitive prices.Weaver Quad Lock 1-Inch medium 49046 (used in this video)Leupold Rifleman Detachable low Rings 56524

No Drill Low-Profile Scout Mount for Mosin Nagant M9130,M44,M38,T53

Add Your Review
$69.95 USD
In Stock
Add to Wishlist

[Firearms, optics and rings are for display only and NOT included]

  • Fits Mosin Nagant M9130 rifle (both round and hex receiver), Mosin Nagant Carbine M44, M38 and T53
  • Works with long eye relief scope so you can keep the straight bolt and use stripper clips
  • No drill, no tap, no permanent modification to your Mosin Nagant
  • ULTRA low profile design allows comfortable cheek weld
  • Elevation adjustable and compatible with stripper clips for fast loading
    To lower the front of the mount (the bullet's point of impact will go UP), loosen the main screw first and tighten the elevation set screw; and vice versa.
  • Works with Long Eye Relief (LER) scopes and you can still use stripper clips for speed loading
  • No gunsmith required, installed in 20 minutes!


    • The following are links to the equipment we used in this video including the scope mount and other third-party accessories such as rings, scopes, etc. We purchased these accessories by ourselves, and we only recommend products that we trust and have been tested extensively by us.

    Long Eye Relief scopes: 

    Hi-Lux Optics Long Eye Relief 2-7x32mm Riflescope (used in this video)
    We also recommend the Burris scout riflescope 2-7x32mm, which comes with the Burris forever warranty.

    Scope rings:

    Both two LER scopes above have 32mm objective lens and can be mounted very close to the bore, which is always desired by shooters. The following two low-profile scope rings are the perfect match for this setup at competitive prices.
    Weaver Quad Lock 1-Inch medium 49046 (used in this video)
    Leupold Rifleman Detachable low Rings 56524

    [Firearms, optics and rings are for display only and NOT included]

  • Fits Mosin Nagant M9130 rifle (both round and hex receiver), Mosin Nagant Carbine M44, M38 and T53
  • Works with long eye relief scope so you can keep the straight bolt and use stripper clips
  • No drill, no tap, no permanent modification to your Mosin Nagant
  • ULTRA low profile design allows comfortable cheek weld
  • Elevation adjustable and compatible with stripper clips for fast loading
    To lower the front of the mount (the bullet's point of impact will go UP), loosen the main screw first and tighten the elevation set screw; and vice versa.
  • Works with Long Eye Relief (LER) scopes and you can still use stripper clips for speed loading
  • No gunsmith required, installed in 20 minutes!


    • The following are links to the equipment we used in this video including the scope mount and other third-party accessories such as rings, scopes, etc. We purchased these accessories by ourselves, and we only recommend products that we trust and have been tested extensively by us.

    Long Eye Relief scopes: 

    Hi-Lux Optics Long Eye Relief 2-7x32mm Riflescope (used in this video)
    We also recommend the Burris scout riflescope 2-7x32mm, which comes with the Burris forever warranty.

    Scope rings:

    Both two LER scopes above have 32mm objective lens and can be mounted very close to the bore, which is always desired by shooters. The following two low-profile scope rings are the perfect match for this setup at competitive prices.
    Weaver Quad Lock 1-Inch medium 49046 (used in this video)
    Leupold Rifleman Detachable low Rings 56524

    PLEASE READ THE FOLLOWING TERMS AND CONDITIONS OF USE CAREFULLY BEFORE USING THIS WEBSITE. All users of this site agree that access to and use of this site are subject to the following terms and conditions and other applicable law. If you do not agree to these terms and conditions, please do not use this site.

    Order Processing:

    Normal order processing can take between 1-3 business days (Monday – Friday)

    Return Policy:

    We guarantee the quality of our products and we want you to be completely satisfied with your purchases. If for any reason you are not completely satisfied with your purchase, you can return the purchased items within 30 days of receipts for an exchange or full refund/Credit (less shipping charges). If you would like to make a return or exchange, you must contact us by email to get an RMA (Return Merchandise Authorization) number before returning your items.

    Please note that shipping cost is non-refundable, and we are not responsible for the return shipping.

    Orders returned after 30 days will be subject to a 25% re-stocking fee. Orders returned after 90 days will be subject to a 50% re-stocking fee.

    Limited Lifetime Warranty

    We (Ace Recreational Equipment and Services Limited) warrants our NDT Scope Mount to be free of defects in materials and workmanship for as long as it is owned by the original owner. We will repair or replace (at our option) any such defective product when it is returned by the original owner with a copy of the original receipt. The repair or replacement will be without charge except for reasonable shipping, handling and insurance charges.

    International (outside of Canada and USA) Ordering

    • International orders are shipped via CanadaPost. There is no delivery guarantee on international orders.  We have no control over customs, international taxes, or other charges imposed by countries outside of the US and Canada.
    • We (Ace Recreational Equipment and Services Limited) are NOT responsible for international shipping delays, such as customs delays and are not responsible for any customs. The buyer assumes all responsibilities of claims made with the shipping carrier and all duties/fees incurred on the shipment. Please contact info@badacetactical.com if you have any questions.
    • Leaving a valid phone number is highly recommended in case the customs office of your country needs to contact you for importing fees or taxes. 
    • All international packages must include a customs form with values of the products. Please do NOT ask us to remove the value or claim it as a gift. Without the customs form, the postal office / customs office will reject the package.